Smart Switch DIN Mount

A real-time smart meter and switch built into a DIN mountable casing (i.e. for fuse box or distribution board fitting).

  • Wireless operation with superb range
  • Simple to install; wire in and go
  • Provides a feedback every 10 seconds of the power being used, accurate to the nearest 0.1W
  • Includes a remotely controllable switch to turn the sockets on/off
  • Surge protected

FEATURES

The Smart Switch (DIN mount) is a DIN mountable Appliance Level Smart Meter and Control System that is designed to be wired inline into an existing appliance. Wire live, neutral and earth into the module and connect the live, neutral and earth connections to the device you want to manage.

It features:

  • Reports power consumption to the nearest 0.1W every 1 second (or slower if needed) to Energy Manager
  • Local control - simply press the red button to switch the unit on and off
  • Controllable (on and off) from the Energy Manager to automatically shut your devices down remotely
  • 13A maximum with surge protection
  • Encrypted communications for secure operation
  • Mesh networking for excellent range
  • Unique serial number embedded in each product for identification on network

Specification

Application Areas:

  • Gas, water and electricity meter interface
  • Data logging and remote data logging
  • Home and office energy management


Wireless Communications

  • Standard: 802.15.4 / Zigbee Pro
  • Does not interfere with WiFi networks
  • Frequency: 2.4 GHz
  • Maximum range between mesh nodes: 32m
  • Maximum nodes per network: >1,000,000
  • Encryption: 128 bit AES


Electrical

  • Power supply: 5V, 300mA, Regulated
  • Power supply connection: screw connections on PCB
  • Power consumption (standby / typical / max): 0.1 / 0.1 / 0.11 W
  • Battery option: n/a


Wireless Communications l

  • Standard: 802.15.4 / Zigbee Pro
  • Does not interfere with WiFi networks
  • Frequency: 2.4 GHz
  • Maximum range between mesh nodes: 32m
  • Maximum nodes per network: >1,000,000 nodes
  • Encryption: 128 bit AES secure encrypted communications
 

Miscellaneous and Standards

  • Standards: CE, EMF, LVD, WEE, ROHS
  • Country of design and manufacture: UK
  • Packaging: cardboard box
  • This unit should be fitted by qualified electricians only

Physical

  • Size (l x w x h): 132 x 120 x 38 mm
  • Fitting: Wall mount
  • Weight: 512g
  • Environmental protection: IP66, suitable for indoor or exterior use
  • Storage (min -> max): -20 to +50°C
  • Storage (min -> max): 0 -> 60 % rel. humidity
  • Operation (min -> max): -50 to +125°C
  • Operation (min -> max): 0 -> 60 % rel. humidity

Measurements and Detection

  • Maximum pulse frequency: 20Hz
  • Pulse detection type: Dry contact / volt free between +VE and -VE
  • +VE connection: +3.3V stabilised supply, short circuit protected, 10mA max.
  • -VE connection: Pulse input, -1.8 to 3.3V
  • Ground connection/Earth: not required
  • Minimum pulse width: 10 milliseconds
  • Maximum pulse width: 3599 seconds
  • Pulse trigger: 10% increase above average voltage on -VE connection
  • Pulse release: 10% decrease below pulse peak voltage on -VE connection
  • Maximum number of pulses recordable: 4,294,967,296
  • Pulses retained between power cycles: Yes (EEPROM)

Valid XHTML 1.0 Transitional